TM 5-3805-280-10 Operating the Machine OPERATING TIPS Before starting work, walk the site to uncover hazards and to plan the job. Check for buried utility lines and pipes, and for gas and oil pipelines Keep site clean and level to maximize machine stability, reduce operator fatigue, and increase productivity. Do not knock down stakes or grade markers. If you lose sight of your guides, you may have to re-work the job. TX,35,DH5070 –19–27JUN96–1/1 DRIVING MACHINE Use your seat belt. Select a route that is as flat as possible. Steer machine as straight as possible making small, gradual changes in direction.
T7527DS –UN–15JUL91 When driving over rough terrain, reduce speed to lessen possibility of undercarriage damage. Reduce speed when carrying a heavy load, or working in a congested area. When possible, avoid obstacles, rough terrain, rocks, curbs, and ditches. In general, decreasing speed increases control. When driving, carry bucket or attachment low for good visibility and machine stability and to avoid overhead obstacles. Visibility may also be improved by rotating upperstructure slightly. TX,35,DH5784 –19–04JUN97–1/1 7-11