John Deere 230LCR, 230LCRD — CHAPTER 7

TM 5-3805-280-10 Operating the Machine IMPORTANT: The safety lock pin is a safety device to mechanically secure the attachment in the event of hydraulic system failure. The machine should not be operated without the safety lock pin in the locked position (E). T120313 –UN–25MAR99 7. The safety lock pin lever is at the rear of the Quick-Disconnect Hitch. Carefully rotate the spring loaded safety lock pin lever toward the excavator to engage the lock pin. CED,OUOE042,65 –19–09DEC99–5/8 QUICK-DISCONNECT ATTACHMENT REMOVAL 1. Fully extend arm and curl bucket in. Place the attachment on the ground. 2.

Manually lift and rotate the safety lock pin lever from its locked position and install it in the unlocked position (F). T120314 –UN–25MAR99 NOTE: Alarm will sound when switch is in unlocked position. 3. To unlatch the Quick-Disconnect Hitch from an attachment fully extend the bucket cylinder. Move the Quick-Disconnect Hitch switch (A) in the operators cab to the unlatch position. Move the control to extend the bucket cylinder again to place hydraulic oil over relief (except for rock drill attachment). This will activate the latch cylinder to the open position. Continued on next page CED,OUOE042,65 –19–09DEC99–6/8 7-18