TM 5-3805-280-10 Operating the Machine 4. Position the Quick-Disconnect Hitch to engage the front hook of the attachment (C). T120311 –UN–25MAR99 CED,OUOE042,65 –19–09DEC99–3/8 5. Rotate the Quick-Disconnect Hitch to seat the rear of the latch over the rear attachment pins (D). CAUTION: Do not raise the attachment without acceptable wedge engagement. The attachment can fall causing possible injury to people in the vicinity of attachment. 6. Move the latch switch to the latch position and move the control in order to carefully curl the Quick-Disconnect Hitch and the attachment to full extension of the bucket cylinder.
This will place oil over relief and divert oil to the hydraulic latch cylinder in order to engage the wedge into the attachment. T120312 –UN–25MAR99 NOTE: Keep the attachment close to the ground during all latch and unlatch operations. CAUTION: Wedge must be engaged into attachment. Continued on next page CED,OUOE042,65 –19–09DEC99–4/8 7-17