John Deere 230LCR, 230LCRD — CHAPTER 7

TM 5-3805-280-10 Operating the Machine Clamping with Hydraulic Thumb CAUTION: This method is less precise and should only be used where there is no concern about crushing the object to be clamped. Retract the hydraulic thumb to the store position (B). This allows better operator visibility. Position the bucket behind and curl it in until it is near or in contact with the object being picked up. Actuate the hydraulic thumb and allow it to grasp and clamp. This method of grasping is usually less precise and objects may be crushed. Lifting Objects T120318 –UN–25MAR99 CAUTION: Always use caution when lifting and transporting objects with the hydraulic thumb and bucket.

Excavators can lift heavy objects that are closer to the excavator. As heavy objects are moved further away from the machine via boom and arm actuation, the possibility of making the machine unstable exists. Use caution when lifting, moving and rotating heavy objects away from the excavator’s main body. Never lift clamped objects over people. The possibility always exists that the lifted objects could drop. Releasing Clamped Objects CAUTION: Always look before you release a clamped load. Never release a clamped load while moving or turning. Objects clamped in the jaws should be released one of two ways. Retract the material clamp or retract the bucket. CED,OUOE042,15 –19–01MAR99–2/2 7-22