TM 5-3805-280-10 Operating the Machine If you have to clean up a cave-in and cannot reach it from machine’s present position, DO NOT back over the trench. Drive the machine beside the trench to the cave-in. Park the machine at a 90 ° angle to trench, with propel motors to the rear of the machine. Clean cave-in from the side of the trench. T7527DA –UN–10JUL91 TX,35,FF2327 –19–13AUG91–2/4 When trenching across a slope, level the machine so that bottom of trench will be level. Level machine by counterrotating tracks or by digging a shelf. Place the spoil pile on the upper side of the trench. The machine is more stable and backfilling is easier.
T7527DB –UN–10JUL91 TX,35,FF2327 –19–13AUG91–3/4 For straight line trenching, drive two stakes in at the beginning of the trench. Drive the first stake in immediately behind the starting point and the second stake approximately 9 m (30 ft) behind the first (A). Use the stakes as a sight gauge. They are especially helpful if the machine is moved often. T6879AU –UN–06DEC88 TX,35,FF2327 –19–13AUG91–4/4 7-26