TM 5-3805-280-10 Operating the Machine TRUCK LOADING Level loading area during wait time between trucks to maximize machine stability, decrease operator fatigue, and increase productivity. Know location of all persons in working area, including truck driver. Do not load the truck unless the truck driver is in a safe place. T7527DD –UN–15JUL91 If possible, park truck where wind will be behind operator to keep dust of the dumped load out of operator’s eyes and out of engine air cleaner. Raise the bucket while swinging toward the truck. Drop first load into truck from a minimum height to lessen the stress on the truck. The first material in the box will cushion following loads.
Dump load into truck at a steady pace (rather than abruptly) to minimize stress on truck. Load truck box from center front to center rear. If loading large rock, first place a load of smaller rock into truck to cushion impact of large rock in truck. Move bucket to excavation level while swinging away from the truck. Do not swing the bucket over the cab. TX,35,FF2332 –19–02JUL91–1/1 7-28