TM 5-3805-280-10 Transporting IMPORTANT: Turbocharger may be damaged if engine is not properly shut down. 9. Close windows, roof vent, and cab door. 5. Run engine at 1/2 speed without load for 2 minutes. 10. Cover exhaust opening to prevent entry of wind and water. 6. Move engine speed rpm dial to slow idle position. IMPORTANT: Prevent possible damage to hydraulic lines, rods, and hoses. Fasten chains to machine frame. 7. Turn key switch to OFF. Remove key from switch. 8. Pull pilot control shut-off lever to locked position. 11. Fasten machine to rail car with 16 chains and IMPORTANT: Prevent cab electrical component nylon strap. damage from bad weather.
Always close windows, roof vent, and cab door. CED,OUOE042,50 –19–19OCT99–2/3 CAUTION: Ensure that the lifting device is capable of supporting the rock drill. The approximate weight of the rock drill is 4536 kg (10,000 lb). Keep all people clear of raised load. 12. Load rock drill onto rail car. 13. Install blocking (A) under rock drill dust collector. 14. Fasten rock drill to rail car with chains and nylon strap. T125560 –UN–03NOV99 CED,OUOE042,50 –19–19OCT99–3/3 8-11