John Deere 230LCR, 230LCRD — CHAPTER 8

TM 5-3805-280-10 Transporting UNLOADING MACHINE FROM TRAILER CAUTION: Prevent possible injury from unexpected machine movement. Turn auto-idle switch off and turn H/P mode switch off when loading or unloading the machine. T7405BJ –UN–29NOV90 1. Turn auto-idle switch off, turn H/P mode switch off, and move propel speed switch to slow speed. CAUTION: Prevent possible injury from machine tipping while upperstructure is rotating. Keep arm tucked under and rotate upperstructure slowly for best stability. 2. Raise bucket slightly off trailer. Keeping arm tucked under, slowly rotate upperstructure 180 ° . TX,40,DH5146 –19–10AUG96–1/3 IMPORTANT: Prevent possible damage to front-end attachment.

Always position arm at 90 ° to boom when unloading machine. Unloading machine with arm tucked may cause machine damage. 3. To move machine over end of trailer onto ramp, T7405BK –UN–29NOV90 position bucket on ground with flat surface of bucket resting on ground. Angle (A) of arm to boom should be 90 ° . Continued on next page TX,40,DH5146 –19–10AUG96–2/3 8-12