John Deere 230LCR, 230LCRD — CHAPTER 11

TM 5-3805-280-10 Maintenance—As Required CLEAN AIR CLEANER DUST UNLOADER VALVE IMPORTANT: A missing, damaged, or hardened dust unloader valve will make the dust cup precleaner ineffective, causing very short element life. Valve should suck closed above 1/3 engine speed. T101488 –UN–15JUL96 Squeeze dust valve (A) to remove dust from the air cleaner. If operating in high dust conditions, squeeze dust valve every couple of hours of operation to release dust. TX,55,DH5084 –19–02JUL96–1/1 CHECK TRACK SAG 1. Swing upperstructure 90 ° and lower bucket to raise track off ground. 2. Keep the angle (A) between boom and arm 90—110 ° and position the bucket’s round side on the ground.

T6879AT –UN–06DEC88 CAUTION: Prevent possible injury from unexpected machine movement. Place blocks under machine frame to support machine while measuring track sag. 3. Place blocks under machine frame to support machine. 4. Rotate track forward two full rotations and then in reverse two full rotations. Continued on next page TX,55,DH5447 –19–04MAR97–1/2 11-5