TM 5-3805-280-10 Maintenance—Every 10 Hours or Daily CAUTION: High pressure release of oil from pressurized system can cause serious burns or penetrating injury. The hydraulic tank is pressurized. Do not remove vent plug (A). Release pressure by loosening vent plug. T7869AT –UN–12NOV92 11. Loosen vent plug (A) to release hydraulic pressure. TX,60,DH5096 –19–08JUL96–3/5 12. Insert 4 mm (0.15 in.) hex wrench (D) into hole (E) and turn counterclockwise. 13. Slowly turn cap (A) counterclockwise. Remove cap. 14. Add oil. (See Fuels and Lubricants chapter.) 15. Install cap to case assembly (C) by aligning marks (B) and turning cap clockwise to lock position.
T6457EI –UN–18OCT88 A—Cap B—Aligning Marks C—Case Assembly D—Hex Wrench E—Hole Continued on next page TX,60,DH5096 –19–08JUL96–4/5 12-4