TM 5-3805-280-10 Maintenance—Every 250 Hours CHANGE ENGINE OIL AND REPLACE FILTER IMPORTANT: If fuel sulfur content exceeds 0.5 percent, change the engine oil at 1/2 the normal interval. NOTE: If engine has not run 250 hours before the season changes, change oil. 1. Run engine to warm oil. 2. Park machine on a level surface. 3. Lower bucket to the ground. 4. Turn auto-idle switch off. IMPORTANT: Turbocharger may be damaged if engine is not properly shut down. 5. Run engine with engine rpm dial at 1/3 position without load for 2 minutes. 6. Move engine rpm dial to slow idle position. 7. Turn key switch to OFF. Remove key from switch. 8. Attach a Not Operate’ tag on the right control lever. 9.
Pull pilot control shut-off lever to locked position. Continued on next page TX,OUOE042,26 –19–08MAR99–1/2 14-3