Maintenance—Every 1000 Hours TM 5-3805-280-10 CHANGE SWING GEARBOX OIL 1. Remove plug (A) mounted on end of drain pipe to drain oil into a container. Dispose of waste oil properly. Swing gearbox oil—Specification Capacity 13 L (14 qt) ................................................................................... 2. Install plug. 3. Remove filler cap (B) and add oil. 4. Install filler cap. 5. Check oil level on dipstick. T102305 –UN–30JUL96 TX,85,DH5441 –19–03MAR97–1/1 CHANGE PILOT CONTROL OIL FILTER CAUTION: High pressure release of oil from pressurized system can cause serious burns or penetrating injury. The hydraulic tank is pressurized. Do not remove vent plug (A).
Release pressure by loosening vent plug. T7869AT –UN–12NOV92 1. Loosen vent plug (A) to relieve air pressure. TX,85,DH5150 –19–10AUG96–1/3 2. Remove filter case (A). T101495 –UN–15JUL96 Continued on next page TX,85,DH5150 –19–10AUG96–2/3 16-1