John Deere 230LCR, 230LCRD — CHAPTER 16

TM 5-3805-280-10 Maintenance—Every 1000 Hours 3. Unscrew filter element (B). 4. Remove O-ring (C) 5. Install new O-ring and filter element. Filter case—Specification T6457ES –UN–19OCT88 Torque 20-30 (15-22 lb-ft) ................................................................... 6. Install filter case (A). 7. Tighten vent plug. TX,85,DH5150 –19–10AUG96–3/3 CHANGE PUMP DRIVE GEARBOX OIL 1. Remove plastic cap and filler plug (A). 2. Remove drain plug (B). Allow oil to drain into a container. Dispose of waste oil properly. 3. Apply Liquid TEFLON Pipe Thread Sealant to drain plug. Install plug. 4. Add oil.

(See Fuels and Lubricants chapter.) Pump Gearbox—Specification Capacity 1.0 L (1.1 qt) ................................................................................. 5. Pull dipstick (C) and check oil level. Oil level must be approximately halfway below (level) mark. 6. Install filler cap. Install dipstick. T101494 –UN–15JUL96 TX,85,DH5685 –19–03MAR97–1/1 16-2