TM 5-3805-280-10 Maintenance—Every 1000 Hours ENGINE SPEED LEARNING PROCEDURE 1. Stop engine. 2. Push engine learning switch (C) up to top position. The switch is a three position switch. Make sure it is in the top position. 3. Turn key switch ON. Wait for 5 seconds. 4. Turn key switch OFF. Wait for 5 seconds. 5. Push engine learning switch to middle position. 6. Check engine speeds. T103674 –UN–11SEP96 Slow Idle—Specification Speed 900 ± 25 rpm ................................................................................... Auto-Idle—Specification Speed 1200 ± 25 rpm .................................................................................
E (Economy) Mode—Specification Speed 1980 ± 25 rpm ................................................................................. Speed 2180 ± 25 rpm ................................................................................. Fast Idle in Standard Mode—Specification NOTE: If engine RPM is not to specifications, see your authorized dealer. TX,85,DH5728 –19–28APR97–1/1 CHANGE AIR CLEANER ELEMENTS 1. Open left front service door. 2. Loosen wing nut to remove cover. 3. Remove wing nut and primary element (A). T6119AF –UN–01NOV88 Continued on next page TX,85,FF2318 –19–01NOV91–1/2 16-7