Maintenance—Every 2000 Hours TM 5-3805-280-10 DRAIN COOLING SYSTEM Drain and flush cooling system using commercial products, replace thermostats, radiator cap, and refill with new coolant. 1. Check coolant hoses (A) for cracks and leaks. Replace if necessary. 2. Tighten clamps. 3. Check radiator and oil cooler for dirt, grease, leaks, and loose or broken mountings. Clean radiator and oil cooler fins. T102676 –UN–02AUG96 CAUTION: Prevent possible injury from hot spraying water. DO NOT remove radiator filler cap unless engine is cool. Then turn cap slowly to the stop. 4. Release air to relieve pressure. Remove filler cap. CED,OUOE042,72 –19–07APR99–1/3 5.
Turn radiator petcock (A) counterclockwise to open valve. Allow coolant to drain into a container. Dispose of waste coolant properly. T121079 –UN–14APR99 CED,OUOE042,72 –19–07APR99–2/3 6. Turn engine block drain cock (A) counterclockwise to drain engine block. Drain coolant into a container. Dispose of waste properly. T102677 –UN–02AUG96 CED,OUOE042,72 –19–07APR99–3/3 17-1