John Deere 230LCR, 230LCRD — CHAPTER 19

TM 5-3805-280-10 DAILY MAINTENANCE HYDRAULIC DUST COLLECTOR 1 Start up the collector. At low temperatures affecting hydraulic oil viscosity, let diesel motor warm up before starting the dust collector. 2. After start-up of the dust collector, first thing that happens, is that a free cleaning cycle automatically runs.When compressor produces correct working pressure - allow further one cleaning cycle without drilling. 3. Check that your dust collector sucks properly by looking at the rubber dump valve (or plastic bag) which shall QUICKLY AND STRONGLY be sucked up against dust collector bottom. 4. Check that GASKET in pick up hood A) and SKIRT B) are not worn out. 5.

Check that suction hose is not damaged or bent. 6. Every day before stopping machine: Clean filters as described under point 2 above 19-9