John Deere 230LCR, 230LCRD — CHAPTER 21

21-12 Operational Checkout PROPEL SYSTEM TRACKING CHECKS (PROPEL ONLY) Engine at fast idle. Propel speed switch in fast position. Propel machine at full speed forward on a flat and level area. Repeat procedure in reverse. Do both tracks move and machine does not mistrack excessively in forward or reverse? YES: Go to next check. NO: Note which track does not move or if machine mistracks note the mistrack pattern. Go to your authorized dealer. – – –1/1 PROPEL SYSTEM TRACKING CHECKS (WHILE OPERATING A DIGGING FUNCTION) Engine at fast idle. Propel speed switch in fast position. Propel machine at full speed forward on a flat and level area.

After machine is moving, slowly move the arm control lever from neutral to full actuation to extend the arm. Does machine mistrack excessively when the arm is extended? NOTE: Machine will slow down during this test. YES: Go to your authorized dealer. NO: Go to next check. – – –1/1 PROPEL SYSTEM MANEUVERABILITY CHECK Engine at fast idle. Propel speed switch in fast position. Propel machine at full speed forward down a slope. Turn in each direction. Repeat the procedure in reverse. Does each track slow down in response to pedal/lever movement in order to turn? YES: Go to next check. NO: Counterbalance valve malfunction. Go to your authorized dealer. – – –1/1