John Deere 230LCR, 230LCRD — APPENDIX A

TM 5-3805-280-10 OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES FOR HYDRAULIC EXCAVATOR 230LCR/230LCRD A-10 ITEM NO. INTERVAL ITEM TO BE INSPECTED PROCEDURE: DO THE PMCS AND HAVE ITEM REPAIRED, FILLED, OR ADJUSTED AS NEEDED EQUIPMENT IS NOT READY/AVAILABLE IF: 22 23 24 Before Before Before Clean Radiator Air Inlet Screens (1) Remove wing nut (A) and pull handles (B) to slide screens up for cleaning. WARNING: Compressed air used for clean- ing purposes will not exceed 30 psi. Use only with effective chip guarding and personal protective equipment (goggles/shield/gloves, etc.). (2) Use pressurized air (30 psi maximum) or low- pressure water to clean screens.

Check Radiator and Oil Cooler Fins (1) Check radiator for damage and clean and remove any debris from radiator screens: a. Inner cooler (top center) b. Oil cooler (lower left) Check Batteries (1) Check battery for damage and connections for corrosion and secure connections. Any damage to radiator or oil cooler fins that may prevent cooling Any damage that would prevent operation or battery will not hold char