TM 5-3805-280-10 OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES FOR HYDRAULIC EXCAVATOR 230LCR/230LCRD A-12 ITEM NO. INTERVAL ITEM TO BE INSPECTED PROCEDURE: DO THE PMCS AND HAVE ITEM REPAIRED, FILLED, OR ADJUSTED AS NEEDED EQUIPMENT IS NOT READY/AVAILABLE IF: 29 30 Before Before After Inspect Swing Gearbox Lines and Oil Level (1) Remove access panel. (2) Check swing gearbox hydraulic lines for evidence of leaks. (3) Check oil level. a. Pull dipstick (A) from tube and check oil level. b. Add oil (tube B) if level is below the ADD or SAFE mark on the dipstick (see Monthly - Check Swing Gearbox Oil Level). NOTE: Ensure that access panel is closed securely after inspection is complete.
Check Engine Oil Use the handle on the hood to raise hood until the end of the rod is securely locked into catch (A). (1) Inspect oil cooling lines and hoses for cracks. (2) Look for evidence of leakage. Any Class III leak eviden Oil is below the ADD or SAFE mark on the dipsti Any Class III leak eviden