John Deere 230LCR, 230LCRD — APPENDIX A

TM 5-3805-280-10 OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES FOR HYDRAULIC EXCAVATOR 230LCR/230LCRD A-20 ITEM NO. INTERVAL ITEM TO BE INSPECTED PROCEDURE: DO THE PMCS AND HAVE ITEM REPAIRED, FILLED, OR ADJUSTED AS NEEDED EQUIPMENT IS NOT READY/AVAILABLE IF: 44 45 46 47 48 Weekly *As Required Weekly Weekly Weekly Quarterly Drain Fuel Tank Sump (1) Park machine on level surface. Rotate upper- structure 90° for easier access. (2) Remove fuel tank fill cap. NOTE: Plug is installed in drain cock to prevent vandalism. (3) Remove plug (A) and open drain cock (B) for several seconds to drain water and sediment into a container. Dispose of waste properly. Close drain cock.

(4) Install and tighten plug. (5) Install fill cap. Check Arctic Starter Fuel Lines (1) Visually check all fuel lines for leaks. Replace damaged, worn, or corroded fuel lines. NOTE: Items 46 through 49 are applicable to Model 230LCRD only. Check Compressor Air Precleaner Dirt Dumps (1) Squeeze the rubber valve (precleaner dirt dump) on each air cleaner housing to ensure that valves are not clogged. Check Compressor Fan Belts Check All Compressor Hoses Any Class III leak eviden Damaged or loose belts Damaged hoses