John Deere 230LCR, 230LCRD — APPENDIX A

TM 5-3805-280-10 OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES FOR HYDRAULIC EXCAVATOR 230LCR/230LCRD Two Points One Point A-19 ITEM NO. INTERVAL ITEM TO BE INSPECTED PROCEDURE: DO THE PMCS AND HAVE ITEM REPAIRED, FILLED, OR ADJUSTED AS NEEDED EQUIPMENT IS NOT READY/AVAILABLE IF: 43 Weekly *As Required Three Points One Point Grease Working Tool Pivots (1) Pump grease (see Fuels and Lubricants, Chapter 9) into the 20 indicated grease points. Grease until grease escapes from joints. (2) *As required: a. Grease every 4 hours during the first 20 hrs. b. Grease daily during the first 30—100 hrs and when working in mud and water or sand.

Three Points Three Points, A—Left Side Shown Fittings damaged or missing Two Points Five Points