STRUCTURE AND FUNCTION ENGINE CONTROL SYSTEM Components of system Fuel control dial 1. Knob 2. Dial 3. Spring 4. Ball 5. Potentiometer 6. Connector Function The fuel control dial is installed at the bottom of the monitor panel. A potentiometer is installed under the knob, and when the knob is turned, it rotates the potentiometer shaft When the shaft rotates, the resistance of the variable resistor inside the potentiometer changes, and the desired throttle signal is sent to the engine throttle • pump controller. The shaded area in the graph on the right is the abnormality detection area and the engine speed is set at low idling. 10-134