TESTING AND ADJUSTING MEASURING PPC VALVE OUTPUT PRESSURE MEASURING PPC VALVE OUTPUT PRESSURE # Oil temperature when measuring: 45 – 55°C 1. Measuring PPC valve output pressure. a. Disconnect hose (1) of the circuit to be measured. b. Install adapter C3 between hose (1) and elbow (2). c. Install oil pressure gauge C1 (5.9 Mpa (60 kg/ cm 2 ) to adapter C3 . d. Run the engine at full throttle, operate the control lever of the circuit to be measured, and measure the oil pressure. If the output at the control valve end is low, measure the input pressure of the PPC valve. If it is normal, there is a defective actuation of the PPC valve. 20-44