TESTING AND ADJUSTING TRACK SHOE TENSION TESTING AND ADJUSTING TRACK SHOE TENSION 1. Testing a. Raise the track frame using the arm and boom, and measure the clearance between the bottom of the track frame and the top of the track shoe. Clearance: 331 ± 20 mm Measurement position 4th track roller from the sprocket. Midway between the 5th and 6th track roller from the sprocket. 2. Adjusting # If the track shoe tension is not within the standard value, adjust as follows. a. When the tension is too high i. Loosen plug (1) gradually, and release the grease. There is a danger that the plug may fly out under the high internal pressure of the grease, so never loosen the plug (1) more than one turn.
# If the grease does not come out easily, move the ma- chine backwards or forwards slowly. b. If track is too loose. i. Pump in grease through grease fitting (2). # If the grease cannot be pumped in easily, move the machine backwards and forwards slowly. 20-56