TROUBLESHOOTING C-MODE C-6 [E204] Short circuit in pump merge/divider solenoid system is displayed # This troubleshooting is carried out when there is still an abnormality, so when disconnecting the connector and inserting the T-adapter, or when removing the T-adapter and returning the connector to its original position, if an E service code is not displayed, the problem has been removed. # If the starting switch is turned OFF after an abnormality occurs, turn the starting switch ON and check is an E # Before carrying out troubleshooting, check that all related connectors are properly iserted. # Always connect any disconnected connectors before going on the next step.
Table 1 C-6 Related electric circuit diagram A04 (KESI) 20-180 BetweenV023(male)(1)-(2) 20-60q BetweenVV0023(male)(2)-chassis NMo icno.n1tinMuqity