TROUBLESHOOTING C-MODE C-7 [E214] Disconnection in pump merge/divider solenoid system is displayed # This troubleshooting is carried out when there is still an abnormality, so when disconnectin the connector and inserting the T-adapter, or when removing the T-adapter and returning the connector to its original position, if an E service code is not displayed. (If it is not displayed, the problem had been removed). # Before carrying out troubleshooting, check that all related connectors are properly inserted. # Always connect any disconnected connectors before going on the next step. C-7 Related electric circuit diagram A04 (KESI) 20-181