TROUBLESHOOTING C-MODE C-8 [E207] Short circuit in active mode solenoid system is displayed # This troubleshooting is carried out when there is still an abnormality, so when disconnecting the connector and inserting the T-adapter, or when removing the T-adapter and returning the connector to its original position, if an E service code is not displayed, the problem has been removed. # If the starting switch is turned OFF after an abnormality occurs, turn the starting switch ON and check is an E # Before carrying out troubleshooting, check that all related connectors are properly inserted. # Always connect any disconnected connectors before going on the next step.
Table 1 C-8 Related electric circuit diagram A03 (KESI) 20-182 BetweenV024(male)(1)-(2) 20-60q BetweenV042(male)(2)-chassis NMo icno.nt1uinMinqity