Komatsu — eebm001902 a3.pdf

TROUBLESHOOTING M-CODE M-17 Coolant temperature gauge does not give any display (none of the gauge lamps light up during operation) # Before carrying out troubleshooting, check that all the relate connectors are properly inserted. # Always connect any disconnected connectors before going on the next step. M-16, 17 Related electric circuit diagram 20-264 YES 1 When P07 is discon- nected, does coolant temperature gauge 2 YES display appear? Is there continuity • Disconnect P07. between C03 • Turn starting switch NO (female) (1) and ON. chassis? 3 YES Does monitoring • Turn starting switch code 41 show a OFF. NO value of less than • Disconnect C03, 500? P07. NO • Turn starting switch ON.

• Set to monitoring code 41 Cause Remedy Defective coolant temperature sensor system (see M-26) Contact of chassis ground with wiring harness between C03 (female) (1) - E08 (6) - P07 (female) (1) Defective engine throttle - pump controller Defective montior panel - Repair or replace Replace Replace