Komatsu — eebm001902 a3.pdf

TROUBLESHOOTING M-CODE M-25 Defective coolant temperature sensor system Table Note 1: If the problem occurs again, the connector (female) at the chassis end is probably defective, so check the connector and wiring harness at the chassis end. Note 2: Check for vibration at the connector mount. If there is excessive vibration, take the appropriate action. 20-270 YES 1 Is resistance between temperature sensor connector (male) (1) and (2) as 2 YES show in table? Check wiring harness visually. Is it broken?

NO Cause Remedy Defective contact of connector (See Note 1) Disconnection in wiring harness (See Note 2) (defective clamp) (external force applied) Defective sensor Clean con- nector or re- place sensor Replace sensor Replace Normaltemperature(20° C) Approx.7307 ~- 5708kq 100°C Approx.33.5q - 4.0 k