DISASSEMBLY AND ASSEMBLY CYLINDER HEAD CYLINDER HEAD ASSEMBLY PC290-6K Removal Disconnect the cable from the negative (-) terminal of the battery. 1. Drain coolant. 2. Open engine hood. 3. Remove fan guard (1), then remove left and right side covers (2) and (3) of fan guard mount. 4. Loosen clamp of hose (4), then remove hose (4) and air connector portion (5) of aftercooler. 5. Disconnect tube (6) and hose (7). 6. Remove turbocharger assembly. For details, see RE- MOVAL OF TURBOCHARGER ASSEMBLY. 7. Remove exhaust manifold cover (8). 8. Remove turbocharger shield mounting bracket (9). # In order to remove mounting bolt (10), do as follows. a. Remove muffler drain pipe. (Main pump end) b.
Loosen muffler mounting U-bolt. c. Rotate connector (11) at the muffler end up slightly to a position where it is possible ro remove the mount- ing bolts. 9. Remove exhaust manifold (12). 1 2 30-26