DISASSEMBLY AND ASSEMBLY CYLINDER HEAD 10. Disconnect electrical intake air heater wiring (13), coolant temperature sensor connector (14). 11. Remove mounting bracket (17) of intermediate clamp for wiring and air conditioner hose at engine end. 12. For machines equipped with air conditioners, disconnect compressor connector (16). Remove air conditioner belt (18), then remove compressor as- sembly (19) together with bracket and move towards counterweight. 13. Remove mounting plate (21) and clamp (20) of dip- stick guide. 3 14. Disconnect radiator inlet hose (22), heater hose (23), and aeration hose (24). 15. Using wrench 1*, raise tensioner (25), then remove belt (26).
Be extremely careful not to get your fingers caught when removing the belt. # For machines equipped with air conditioning, before removing belt, loosen 4 mounting bolts of air condi- tioner pulley (27). 16. For machines equipped with air conditioning, remove air conditioner 30-27