Komatsu — eebm001902 a3.pdf

DISASSEMBLY AND ASSEMBLY IDLER ASSEMBLY OF IDLER ASSEMBLY 1. Press fit bushing (12) to idler (5). 2. Fit 0-ring and install support (10) to shaft (11), then install pin (9). # After inserting the pin, caulk the pin portion of the support. 3. Using tool J1 , install floating seal (7) to idler (5) and shaft and support assembly (6). # Coat the sliding surface of the floating seal with oil, and be careful not to let any dirt or dust get stuck to it. # Remove all grease and oil from the contact sur- face of the 0-ring and the floating seal. 4. Assemble shaft and support assembly (6) to idler (5). 30-71