Komatsu — eebm001902 a3.pdf

DISASSEMBLY AND ASSEMBLY IDLER 5. Using tool J1 install floating seal (4) to idler (5) and support (3). # Coat the sliding surface of the floating seal with oil, and be careful not to let any dirt or dust get stuck to it. # Remove all grease and oil from the contact sur- face of the 0-ring and the floating seal. 6. Install 0-ring, then assemble support (3) and install pin (2). # After inserting the pin, caulk the pin portion of the support. 7. Add oil and tighten plug. Oil: Approx. 230 cc (E030-CD) Plug: 152.0 ± 24.5 Nm (15.5 ± 2.5 kgm) 30-72