DISASSEMBLY AND ASSEMBLY CARRIER ROLLER REMOVAL OF CARRIER ROLLER ASSEMBLY 1. Lower work equipment to ground, then loosen lubrica- tor (1), and relieve track tension. 1 The adjustment cylinder is under extremely high pressure, so never loosen the lubricator more than one turn. If the grease does not come out, move the machine backwards and forwards. 2. Using hydraulic jacks a push up track to a position where carrier roller assembly can be removed, then remove carrier roller assembly (2). 2 Carrier roller assembly: 35 kg INSTALLATION OF CARRIER ROLLER ASSEMBLY Carry out installation in the reverse order to removal. 1 # Adjust the track tension.
For details, see TESTING AND ADJUSTING, Testing and adjusting track ten- sion. 30-77