Komatsu — eebm001902 a3.pdf

DISASSEMBLY AND ASSEMBLY HYDRAULIC TANK HYDRAULIC TANK Removal 1. Drain oil from hydraulic tank. Hydraulic tank: Approximately 170 l. 1 2. Remove engine hood (1), pump top cover (2), and control valve top cover (3). 3. Remove right side cover (4) together with cover mounting frame (5). 4. Remove engine partition plates (6) and (7) and mount- ing bracket for partition plate on hydraulic tank side. 5. Disconnect hydraulic oil return tube (8). 6. Remove pump suction tube (9) together with joint hose (10). 7. Disconnect oil level sensor connector (11) and re- move LS pressure hose clamp (12). 8. Disconnect 7 hydraulic tank return hoses, fit tags to distinguish them.

# After disconnecting the hoses, fit tags to distinguish them. # Protect with the sleeve nut to prevent damage to the nipple or elbow taper seal portion. 9. Sling hydraulic tank assembly (14), then remove mounting bolts, and lift off hydraulic tank assembly. Hydraulic tank assembly: 136 kg. 3 30-83