Komatsu — eebm001902 a3.pdf

DISASSEMBLY AND ASSEMBLY MAIN PUMP MAIN PUMP Removal Disconnect the cable from the negative (-) terminal of the battery. Lower the work equipment completely to the ground and stop the engine. Then loosen the oil filler cap slowly to release the pressure inside the hydraulic tank. Remove the hydraulic tank strainer, and using tool B , stop the oil. When not using tool B , remove the drain plug, and drain the oil from the hydraulic tank and inside the sys- tem. Hydraulic tank: Approx. 170 l. Drain oil from damper case. 1. Remove engine hood cover. (1) 2. Remove main pump top cover. (2) 3. Remove right side cover (3) together with cover mounting frame (4). 4.

Remove connectors (5) and (6) from bracket and dis- connect. 5. Disconnect Front and Rear pump discharge hoses (7) and (8), Front and Rear LS pressure hoses (9) and (10), and EPC basic pressure hose (11). # Protect with the sleeve nut to prevent damage to the nipple or elbow taper seal portion. 30-85