DISASSEMBLY AND ASSEMBLY CONTROL VALVE 6. Disconnect 5 hoses (11) beetween control valve and relay block, hose (12) between control valve and tim- ing valve, travel vale pilot hose (13), 2 boom valve pi- lot hoses (14), and 2 relief valve pilot hoses (15). # After disconnecting the hoses, fit tages to distinguish them. # Protect with the sleeve nut to prevent damage to the nipple or elbow taper seal portion. 7. Disconnect 2 travel valve junction hoses (16). 8. Disconnect 2 LS pressure pilot hoses (17). # After disconnecting the hoses, fit tags to distinguish them. 9.
Disconnect 4 hoses (20) between control valve and relay block, hose (21) between control valve and tim- ing valve, travel valve junction hose (22), travel valve pilot hoses (23), and pilot hose (24) between arm and bucket. # After disconnecting the hoses, fit tags to distinguish them. # Protect with the sleeve nut to prevent damage to the nipple or elbow taper seal portion. 10. Disconnect 2 each of bucket valve tube (25), boom valve tube (26), and arm valve tube (27). 11. Disconnect 2 each of right hand travel valve hose (28), swing valve hose (29), and left travel valve hose (30). 12. Disconnect 2 LS select valve pilot hoses (31). 30-90