Komatsu — eebm001902 a3.pdf

DISASSEMBLY AND ASSEMBLY BUCKET BUCKET Removal Set the back of the bucket facing down, lower the work equipment completely to the ground, and set the safety lock lever to the LOCK position. 1. Remove lock bolt (1). 1 2. Remove connecting pin (2) between link and bucket. # There are shims installed, so check the number and thickness, and keep in a safe place. 2 3. Start engine, and retract piston, rod, then tie the piston rod with wire to prevent it from coming out. 4. Remove lock bolt (3). 3 5. Remove plate (4), then remove connecting pin (5) between arm and bucket. # There are shims installed, so check the number and thickness, and keep in a safe place. 4 6.

After raising work equipment, swing to disconnect bucket assembly (6). Bucket assembly: 875 kg 30-123