Komatsu — eebm001902 a3.pdf

DISASSEMBLY AND ASSEMBLY OPERATOR'S CAB REMOVAL OF OPERATOR’S CAB ASSEMBLY Disconnect the cable from the negative (-) terminal of the battery. 1. Remove floor mat. (1) 2. Remove operator’s seat assembly. (2) (Disconnect heated seat connection is fitted). Operator’s seat assembly: 40 kg. 3. Remove knob(3). 4. Remove 4 caps (4) and clip (5), then remove middle panel (6). 5. Remove bottom panel (7). # The panel is held by a clip, so remove the clip when removing the panel and be careful not to damage it. 6. Disconnect washer hose (8). 7. Remove radio (11) if fitted (refer to radio operation manual). # Remove plate (9), then remove cover (10). 8.

Lift cover (10) away carefully to locate speaker har- ness connector. Disconnect and remove panel com- pletely. 30-131