STRUCTURE AND FUNCTION CLSS Introduction of LS pressure # The diagram shows the condition for arm IN. 1. Main pump 2. Main spool 3. Pressure compensation valve 4. Valve 5. Ball valve 6. LS circuit 7. LS shuttle valve Function The upstream pressure (= spool meter-in downstream pressure) of pressure compensa- tion valve (3) is introduced and goes to shuttle valve (7) as the LS pressure. When this hap- pens, it is connected to port B of the actuator through valve (4), and LS pressure actuator load pressure. Introduction hole a inside the spool has a small diameter, so it also acts as a throttle. Operation 1.
When spool (2) is operated, the pump pressure passes through introduction hole a , enters port C , and is taken to the LS circuit (6). When the pump pressure rises and reaches the load pressure of port B , ball valve (5) opens. 10-57