. OPERATION DETAILED CONTROLS AND GAUGES (D): HEAT position the engine. Fuel Control Dial Dial (2) adjusts the engine speed and output. (a)Low idling (MIN): Turned fully to the left (b)Full speed (MAX): Turned fully to the right Range (c): No feeling (engine speed constant) P mode: 22% E mode: 30% Position (d): High idling 3 - 71 Set to this position wh en starting the engine in When the starting key is turned to HEAT position (D), the p reheating monitor lights up. K eep the key in this position until the preheating m onitor flashes. When the p reheating monitor flashes, release the k ey immediately.
Whe n the key is released, it will r eturn automatically to OFF position ( A), s o turn it immediately to S TART position (C) and start REMARK On this machine, the engine is electronically co ntrolled to give the optimum matching wi th the main pump. There is an area without any feeling on the dia l, but this is not an abnorm ality. Cigarette Lighter d when lighting cigarettes. hter is pushed in, it will return to its original seconds, so pull it out to use it. is removed, the socket can be used as an wer source. This switch (3) is use d when lighting cigarettes.
When the cigarette lig hter is pushed in, it will re turn to its original position after several seconds, so pull it out to u If the cigarette lighter 85W (24V x 3.5A) po NOTICE This cigarette lighter is f or 24V. Do not use it as the p ower sourc e for 12V equipment.