. OPERATION DETAILED CONTROLS AND GAUGES Swing Lock Switch WARNING (5) is used to light up the working lamp and monitor 3 - 72 When not using the swing operation, e.g . when traveling, put the swing lock switch to the ON po On slopes , even when the swing lock s witch is at the ON position, the weight of the work equi pment may cause the upper structure t o swing if the swing control le ver is operated in the downhill direction. This switch (4) is used to lock the uppe r structure so that it cannot swin g. (a) ON position (actuated): The swing lock is always applied, and the upper s if the sw condition, up. (b) OFF position (canceled): The swin tructure will not swing even ing is operated.
In this the swing lock lamp lights g lock is released, when the swing control lever, operating allowing t he upper structure to swing. Lamp Switc This switch lighting. (a) Night position: Lamps light up and monitor illumination is set to night mode (b) Day position: Lamps light up and m day mode (c) OFF position: Lamps go out. onitor illumination is set to tion is set to day mode.) (The monitor illumina tion is set to day mode.) Horn Switch Use t his Pres s the s witch on the right work con trol lever to sound the horn.