Komatsu — STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS OPERATION MACHINE OPERATIONS AND CONTROLS engine will start. REMARK 4. After the engine starts, release the key in starting switch (3). REMARK 3 - 129 3. Turn the key in starting switch (3) to START posi tion (C). The If the ambien when the key in the starting switch (3) i s kept at the ST ART position fo r 20 second start again fro m the beginning will automatically return t o the ON positi When the eng ine is started, the batter y voltage may s uddenly drop depending on the temperatur e and t he battery con dition. If this happens, the display on the machine monitor may m omentarily go out, but this d oes not indicate any ab 5.

Even if t monitor t pedal whi he engine starts , wait for the engine oil pressure o go out. Do not touch the control lev ers or control le the engine oil pressur e monitor is lig hted up. NOTICE If the engine oil pressure monitor d oes not go out even after 4 to 5 seconds have passed, s top the engine immediately . Check the oil l evel, check for leakage of oil, and take the necessary acti on.