. OPERATION MACHINE OPERATIONS AND CONTROLS STARTING ENGINE Normal Starting WARNING 3 - 128 Start the engine on ly after sitting down in the operat Do not attempt to s tart the engine by short-circuiting the engine starting circuit. Such an act may ca use a serious bodily injury or fire. Check that there ar e no persons or obstacles in the surrounding area, t hen sound the horn and sta Never use starting aid fluids as they may cause expl Exhaust gas is toxi c. When starting the engine in co nfined spaces, be particularly careful to ensur NOTICE Before starting the engine, check that fuel control d ial (2) is at the low idling (MIN) positio position, the engin n.
If the fuel control dial is at th e will accelerate suddenly and ca e full speed (MAX) use damage to the engine parts. Do not keep the key in starting switch (3) at the START position ore than 20 seconds. continuously for m If the engine does not start, wait for at least 2 minute s, then start again from the beginning . After the engine st arts, wait for the engine oil press ure monitor to go out. Do not touch t he control levers or control pedal while the engine oil pressure monitor i s lighted up. 1. Check the lock lever (1) is in the LOCK positi on (L). If the lock lever is in the F REE position (F), the engine d oes not start. 2. Set fuel control dial (2) to the low idling (MIN)