. OPERATION MACHINE OPERATIONS AND CONTROLS MACHINE OPERATION WARNING Preparations for Moving the Machine (a): ON position (b): OFF position 3 - 145 Before operating t he travel lever or tr avel peda l, check the direction that the track frame is facing. When the track fra me is facing the rear (when th e sprocket i s at t he f ront), the d irection of operation of t he travel lever and trave pedal is the oppos ite to the direction of move ment of t he m achine (forward/reverse, left/right). Before starting the machine off, chec k that the area aroun d th e machine is s afe, and sound the horn Do not allow anyon e to enter the area around t he machine.
Remove any obsta cles from the trave l path. The area at the rea r of the machine is a blind s pot. Always use the camera to check the area at the re ar of the machine before traveling in reverse . When the auto-dec eleration is being u sed, if th e travel leve r or travel pedal ar e operated, the engine s peed will suddenly rise so be careful when operating the trav el lever o r travel peda l. . When traveling, ch eck that the travel alarm wo rks properly 1. Set swing lock switch (1) to th e ON (a ctuated confirm that sw ing lock monitor l amp (2) lights osition and 2. Turn fuel contro l dial (3) towards the full speed (MAX) position to increase the engine speed.