. OPERATION MACHINE OPERATIONS AND CONTROLS or by distributor for repair. 3 - 146 Moving Machine Forw 1. Set lock lever (4) in equipment, and rais ground. If the work equipm fficult to e the work equipment to a greate r height. 2. Operate the right and left travel levers (5), or the right or lef t travel pedals When sprocket (A) is s ituated at the rear of the machin Start the machine eith er by pushing lever (5) f orward s lowly or b y stepping on the fro nt part of pedal (6) slowl When sprocket is situa ted at the front of the m achine; Start the machine eith er by pulling lever (5) b art of pedal (6) slowly. ack slow stepping on the rear p 3. Check that the travel alarm sounds properly.
If the tra vel alarm does not sound, please co ntact your Komatsu REMARK e machine travel speed is not normal, thoroughly perform the warming-up operation. In cold temperatures, if th e machine travel speed is not n ormal, thoroughly p erform the warmi ng-up operatio In addition, if the underca rriage is clogged with mu d and th e machine travel sp eed is not normal, remove the so il and mud from the undercarria ge.