. OPERATION MACHINE OPERATIONS AND CONTROLS 3 - 147 Moving Machine 1. Set lock lever equipment, and ground. If the work e to y, raise the work eq uipment to a great er height. work from he 2. Operate the rig ht and left travel lev ers (5), or the righ t or left travel pedals (6) as follows When sprocket ( A) is at the rear of t he machin Slowly pull the le vers (5) backward, or slowly depress part of the pedals (6) to move the m achine bac kward. When sprocket ( A) is at the front of the machin e: Slowly push the levers (5) forward, or slowly d epress the front part of the pedals (6) to move the m achine bac kward. 3. Check that the t ravel alarm sounds properly.
If the tr avel alarm does not sound, please contac t you r Komatsu distributor for re REMARK s, if the machine travel speed is not normal, thoroughly perform the warming-up operation. In cold temperature s, if the machine tr avel speed is not normal, thoroughly p erform the warming-u p operatio In addition, if the un dercarriage is clogg ed with mu d and th e machine travel sp eed is not norm al, remove t he so il and mud from the under carriage.