Komatsu — EVERY 250 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE CHECK AND ADJUST COOLING FAN BELT TENSION 4 - 52 Checking 1. Open en gine hood (1). 2. Deflectio n a should be 7-10 mm (0. 3-0.4 in) when t he belt i pressed with the thumb with a force o f approx. 58.8 N (6 kg) a a point m idway betwee n the alternat or pulley and fan pulley. Adjustment ounting bolt (3) of alternator (2). lternator lock bolt (4). 1. 2. 3. i ( 4. 1. 2. Loosen m Loosen a ounting bolt ( lternator lock Turn tens t and ad ion bolt (5) of just so that th alternator (2) in the direction to loose e belt tension is 7-10 mm (0.3-0.4 in approx. 58.8 N (6 kg)) . t touch double nut (6). 3) and lock bolt (4).

When do ing this, do no t touch doubl e nut (6). 4. Tighten m ounting bolt ( 3) and lock b olt (4) NOTICE Check each pulley for dama ge, wear of the V-groove , and we ar of the V-belt. In particular, be sur e to check that the V- belt is n ot touchin g the bottom of the V-groove. If the belt i s stretched and lowanc distributor f or replacement.