Komatsu — EVERY 250 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE CHECK AIR CONDITIONER COMPRESSOR BELT TENSION, ADJUST Checking 1. Open engine hood (1). a point midway between compressor pulley (3) and fan pulley (4). NOTICE 4 - 53 2. Deflection (A ) should be 5-8 mm (0.2-0.3 in) wh en the belt is the thumb with a forc e of approx. 5 8.8 N (6 kg) at Adjustment (1) and (2). 1. Loosen bolts Compress and (2) are (4) with th 2. Loosen bolt ( adjust. 3. When the po bolts (1) and 1. Loosen bolts or (3) is installed to b racket (4), so when bolts (1) loosened, it becom es possible to move bracket e mounting position of bolt (2) as th e fulcrum.

(2) to hold it in positi Check each pulle y for damage, wear of t he V-groove, an d wear of the V-belt. In particular, be sure to check that the V-belt i s no touching the bot tom of the V-groove. In case any of th e following occurs, ask the Komatsu di stributor in your territory to replace the bel ts with new ones. • The fan belt h as elongated, leaving li ttle allowance fo r adjustmen • A cut or crack is found on the belt. • Slipping or cre aking sound is heard c oming from the When the new V- belt is set, readjust it a fter one hour of