Komatsu — EVERY 1000 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE CHECK OIL LEVEL IN PTO GEAR CASE, ADD OIL WARNING Parts and oil are at high temperature immediately after the engine is stopped and may cause serious burns. Wait for the oil near Standard specifications machine Attachment specifications machine 6. Install the undercover of the pump chamber. 4 - 70 CHECK ALL TIGHTENING POINTS OF ENGINE EXHAUST PIPE CLAMPS Please ask you r Komatsu dis tributor to check the tig htening o f the clamps between the air cleaner - turbocharge - aftercooler - e ngine. temperature to g o down before p erformin g this 1.

Swing the upper structure so that the PTO gear c ase is in the middle between the le Stop the e ngine and set t he lock l ever to t he LOC K position. 2. Remove u ndercover of th e pump chambe 3. the bottom of the plug hol 4. If the oil lev of the mac el is low, open hine, remove th the pum e plug f p room d rom oil f oor on iller (F), the right and add Add oil unti l the oil level is close to the bottom of t he hole inspection 5. Install oil in spection plug ( G) and the plug of oil fil